home *** CD-ROM | disk | FTP | other *** search
- Path: news.sinet.slb.com!usenet
- From: bar@canuck.englewood.geoquest.slb.com (Bernhard A. Rieckhoff)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: 1/4" SCSI tape drive (genuine C=)
- Date: 4 Mar 1996 14:44:42 GMT
- Organization: Schlumberger
- Message-ID: <4hevkq$fft@ohnasn01.sinet.slb.com>
- References: <4h5r2l$7k2@conargo.dpie.gov.au> <19960301.799FFD8.71FB@scott.net>
- NNTP-Posting-Host: 163.185.53.83
- X-Newsreader: knews 0.9.3
- In-Reply-To: <19960301.799FFD8.71FB@scott.net>
- To: shadoe@scott.net (Jack Bucchannan)
-
- In article <19960301.799FFD8.71FB@scott.net>,
- shadoe@scott.net (Jack Bucchannan) writes:
- >Antti J. Roppola (ajr@henric.nric.gov.au) wrote:
- >: I just scored a genuine C= 1/4" tape drive the other day (as pillaged from
-
- SNIP...........
-
- >: Question is, what do I need to set it up? I have GNUTar, and tried to
- >: guess a mountlist entry (to no avail).
-
- SNIP.....
-
-
- >Get the TAPE: device form aminet.... not sure where it is located, but I had
- >a 3070 just like yours, and this nifty device-handler from Matt Dillon is
- >just the ticket. Do a keyword search for 'tape' and you will find it.
- ..
-
- Dont forget BTNTAPE (version3.?) on Aminet and Fish 1000
-
- Dillons Tape: device doesn't work for everyone, It didn't with my Xetec
- SCSI on my A500, however your mileage may vary. BTNTape works fine for
- me on the A500. I'm still lacking a cable to try it on my A1200 with
- Squirrel SCSI.
-
- --
- PLEASE REPLY TO: brieckhoff@houston.geoquest.slb.com
- Bernhard Rieckhoff Sr. Geophysicist, Schlumberger-GeoQuest
- Denver, CO USA Voice (303) 486-3204 FAX (303) 694-4690
- *Opinions expressed here are unlikely to reflect those of my employer*
-
-